LYNX: Getting Started wizzard
1 / 11
Interactive getting started wizard
This wizard will guide you through the process of setting up a LYNX controller for the first time. The wizard is interactive and will guide you through the process step by step.
Please read all the instructions carefully before proceeding. If you encounter problem, go back and double check all your steps.
Scope of this wizard
- SWTools installation
- Controller wiring
- Connecting to the controller
- Motor configuration
- Throttle configuration
- Map configuration
- Speed computation configuration
At the end you will have a ridable vehicle with throttle and set of maps.
Preparation
Safety precaution
- Do not connect the controller yet.
- Lift your vehicle from the ground. Allow the motor to spin freely.
- Secure the vehicle against any movement
- Power the controller from a battery, do not use a power supply!
- Do not use a battery without a Battery Management System (BMS)