Storage mode
info
Storage mode is an optional feature. It may not be available on all BMS firmware variants.
Storage mode allows the BMS to automatically discharge the battery to a safe storage voltage when the battery will not be used for an extended period. This helps preserve battery health during long-term storage.
info
All mentioned variables are located in folder /driver/storage/.
Configuration
| Parameter | Unit | Description |
|---|---|---|
cell_voltage | mV | Target cell voltage for storage mode |
delay | days | Enter storage mode after this time of inactivity (0 to disable) |
States
| State | Value | Description |
|---|---|---|
storage_mode | 0 | Not in storage mode |
storage_mode | 1 | Balancing to storage voltage |
storage_mode | 2 | Storage voltage reached |
Shell commands
| Command | Description |
|---|---|
storage | Enter storage mode |