How to wire the BMS within a battery pack

Procedure:

warning

The connection procedure must be followed in order, otherwise the BMS may be destroyed.

1. connect the output power wires to the BMS (DSC, CHG, Vbat)
2. connect the Con4 connector - temperature sensors
3. connect the Con1, Con3 connectors - communication, accessories
4. connect the PGND to the negative pole of the lowest cell on the pack
5. connect the live Con2 connector (balancing and measuring of the cells)
6. __lastly, __connect the live VBAT to the positive pole of the highest cell on the pack
7. finally, use a computer to make the necessary configuration

Power connection - GOOD

Power connection - BAD