Raptor A Flat
The Raptor A edition with the most compact flat form factor � optimized for airborne applications such as professional UAVs, fixed-wing electric aircraft, eVTOL platforms, and tactical drone systems where weight and thickness are critical.
Applications
- Professional UAV and multirotor drone propulsion
- Fixed-wing electric aircraft drives
- eVTOL and hybrid-electric air mobility platforms
- Military and defense autonomous aerial systems
- Reconnaissance, surveillance, and tactical drone missions
- High-altitude long-endurance (HALE) aircraft
- Aerospace actuator and servo control
- Counter-UAS and loitering munition powertrains
Product identification label
Each product is equipped with an identification label containing pertinent information.
| Position | Name |
|---|---|
| 1 | Maximum operating voltage |
| 2 | Country of manufacture |
| 3 | SN QR code |
| 4 | Serial number |
| 5 | Product Name |
| 6 | Order code |
Built-in LED status indicator
The AM controller has a built-in LED which indicates the state of the control program:
- Bootloader -- LED lights very briefly while firmware version and checksums are checked. If the controller remains in this state for more than a few seconds, there is a firmware problem. Try updating the firmware.
- Main program -- LED is lit while the Driver initializes.
- Driver -- the motor control part of the firmware:
- LED off -- Driver successfully initialized, motor can be driven
- LED on solid -- Driver status word is non-zero, a high priority limiter may be active. LED turns off after 2 second timeout when condition passes.
- LED blinking -- an error occurred. LED blinks 16 times, pauses, then repeats. Each blink represents one bit of the error word (long blink = 1, short blink = 0, LSB first).
Accessories
Signal connector mating parts (JST JWPF)
| Connector | JST Part Number |
|---|---|
| USB mating connector (4-pin female) | 04R-JWPF-VSLE-S |
| Power mating connector (3-pin male) | 03T-JWPF-VSLE-S |
| UART COM, CNTRL1 mating connector (4-pin male) | 04T-JWPF-VSLE-S |
| CAN, PAS mating connector (3-pin female) | 03R-JWPF-VSLE-S |
| DIN mating connector (2-pin female) | 02R-JWPF-VSLE-S |
| DOUT mating connector (2-pin male) | 02T-JWPF-VSLE-S |
| Motor sensor mating connector (8-pin female) | 08R-JWPF-VSLE-D |
| Receptacle contact 22-26 AWG | SWPR-001T-P025 |
| Tab contact 22-26 AWG | SWPT-001T-P025 |
| Crimp tool | WC-JWPF |
| Removal tool | EJ-JWPF |
Power connectors
- Battery mating connector: Amass XT60H-F
- Motor mating connector: Amass MT60-M
Mounting screws
- 4x M3 screw. Recommended mounting torque: 1.3 Nm.
- Refer to the AM controller drawing.
Thermal grease
- To improve cooling of the controller, apply thermal grease to the mounting area. Example: Electrolube HTC, AG termopasty HPX