Skip to main content
Firmware Stable

AX series

Request your sample

If you want to quickly receive a comprehensive offer tailor-made for your project, please submit the online form.

Submit online
1 week delivery
1 week delivery
Basic support included
Money back
Money back guarantee

This compact 3 kW brushless motor controller, classified among the smallest products in our portfolio, features an efficient design and durable aluminum housing. With a continuous phase current up to 50 Arms and peak current up to 100 A, it provides reliable performance for small electric motor control. The single signal connector (Molex iGrid) ensures easy installation, bringing convenience and efficiency to a wide range of applications.

Product editions​

  • AX controller — Compact 3 kW brushless motor controller in a sealed aluminium housing.

Product variants​

The Manufacturer Part Number (MPN) completely specifies the product type and version. When combined with the Firmware Identifier (Basename), it can serve as the ordering code. The MPN is made up of different sections, which are explained in the table below. Typically, only the standard variant is in the stock.

warning

  • The pricing for non-standard MPN is individual. Please contact siliXcon for quotes.

  • For sample orders, selecting a non-standard product variant may result in increased pricing and extended lead times compared to standard samples.

Standard MPNs

Decode MPN

Features

Controller size
Power features
Connectivity
Motor sensors
Absolute voltage limit
Current range
Details

Complete MPN:

ax-mpn

Assembly variant:

ax-assembly variant

  • Power stage: Usually defines a variant of the power stage, occasionally can indicate a special version of the product's PCB.
  • Power features: Defines variant of the powering interface. See powering circuit's detailed specification and Controller powering methods.
  • Connectivity: Defines variant of the communication interface. See USB, CAN, UART.
  • Motor sensors: Defines supported motor position sensors. More information about the particular motor position sensor interface can be found in this section. General information about motor sensors can be found in Motor sensors chapter.
  • Voltage: Defines voltage operation range of the controller. Detailed technical specifications can be found in this section.
  • Current: Defines current measurement range of the controller.
  • Internal HW configuration: see section below

Internal HW configuration:

Internal HW configuration describes selectable modifications in hardware. Each item can be present (marked with 1) or absent (marked with 0). A 12-bit binary number is used for this description and is visualized in hexadecimal form. Not all the options are used, these items are marked as "Reserved".

ax-intHwConfig

  • Powering on method: The device offers several powering methods, defined by the combination of the following items. For details see powering circuit's detailed specification.
    • Internal Fuse
    • Flip-flop / One button control
    • Constant ON
  • Power supply option: Defines isolated supply voltage level on signal connector pin 35.
  • CAN terminator: The device has a selectable internal 120-ohm termination resistor. A detailed CAN interface scheme can be found in the CAN communication interface.
  • Connected grounds: It is possible to connect two grounding potentials together by the internal jumper.
  • ODINs configuration: Defines configuration of pull-up and pull-down resistors for ODINs.

Finish 1 and Finish 2:

ax-finish

  • Housing: Defines housing option.